Fc8 fullrange driver

 1,556.30

Kategorie: Štítky: , ,

Popis

Cube Audio Fc8 is the 8″ fullrange driver that provides second to none listening experience.  Due to numerous In-house developed technologies, it is one of the most advanced fullrange speakers that ever existed. Customisation of every component has resulted in rich, dynamic, open, natural sound that redefines term „fullrange driver“. Fc8 is a completely new quality in fullrange speakers. The level of openness, microdetail, resloution and overall holography is never to be found in fullrange drivers before. One of the most sophisticated magnetic motor allows this 8 inch speaker to outclass many well established tweeters.

Solutions and technologies used in Fc8 fullrange driver:

  • Copper & Aluminium Faraday Ring System
  • Mixed magnet motor (Neodimium + Ferrite)
  • Ultralinear low dumping spider
  • Underhung voice coil
  • Multicoated waterproof paper cones

 

Speaker dimensions:

  • Width / height = 222 mm
  • Depth = 101 mm
  • Weight = 5 kg

Thiele/Small parameters:

  • Fs  = 42 Hz
  • Re  = 6 ohms
  • Le  = 0.094 mH
  • Qt  = 0.38
  • Qes = 0.39
  • Qms =14.3
  • Cms = 0.81 mm/N
  • Vas = 55 liters
  • Sd= 230 cm^2
  • Bl  = 8.6 T*m
  • Xmax = +- 3 mm*
  • Xdamage = +- 6 mm
    Sensitivity = 92 dB

Magnetic motor

The first step was to design magnetic motor – the heart of the speaker. For our 8 inch speakers we designed a motor that is powered by both ferrite and neodymium magnets. The hybrid magnet system and unique geometry of the pole piece enabled us to create motors with magnetic filed strength of 1.9 Tesla. Not only that, but the magnetic gap height is equal to  9 mm. That allowed the speakers to be a completely underhung voice coil design. Since the voice coil practically does not leave magnetic gap with uniform field strength along all the gap height, the raw power, linearity and reduction of distortions are at their best. In order to maintain 0.01 mm tolerance of all elements, magnetic motor components are manufactured using computer controlled CNC lathes.

   Our magnetic motors were further enhanced by the most advanced Faraday Ring system that was ever used in 8 inch speakers. The elimination of eddy currents, reduction of voice coil inductance which translates to higher cut-off frequency and reduction of distortions is well worth the resultant complexity of the magnetic motor. We experimented with galvanisation of pole pieces with thin layers of various non-magnetic metals and combinations of CNC milled elements made of aluminium, brass and copper. The combination that we decided to go with, is in our opinion is the most optimal one.

The spider

Another unique solution is a lower suspension commonly called the “spider”.  After listening to the prototypes with manifold, even most advanced spiders available for speaker manufacturers, we agreed that we had to develop our own solution. The issue with the spider is that, by being  a damper it dissipates the energy, that otherwise would be transferred into the speaker cone. It makes the speaker sound  weak and dull, so we knew that it is an unacceptable way to go. We wanted a material that does not absorb energy and only transfers it.

    After conducting many tests  the solution was found and it turned out to be even better than we expected. It is 100 % linear within the maximum excursion of the speakers ( + – 6mm). It behaves like a spring. It does not consume the energy by damping, it just positions the voice coil in the magnetic gap. The downside of such technology is that each spider has to be milled with precise CNC machine. Nevertheless the advantages are obvious and totally worth it. In order to measure the actual compliance (amount of excursion under known force) of the suspensions, we designed and custom a made special device. You can see the graph with measurement comparison of our suspension and classical (resin soaked cloth) spider below.

Cones and wheezers

The cones used in the drivers are made of paper. We tested countless cone materials (including t-shirt cotton soaked with hardening solution that was so rigid that you could crack and crush it just like an eggshell). Whatever we tested, the cellulose (paper) ended up as the best way to go. After many attempts to find the best sounding paper we finally got it. Nevertheless we still had to find a coating solution. Paper that isn’t protected from atmospheric moisture will, as time pass, absorb it into the its fibres. That results in huge sound changes. The thing that suffers the most are high frequencies. Month after month they will get more blunt, blurred and in the end – not present. We developed a lightweight organic resin solution, that completely penetrates paper and seals all pores, so that no moisture will ever enter the paper.

Connecting the dots

Thanks to all the technologies that we developed, we possess nearly complete control over speaker behaviour, sound character, frequency response and Thiele – Small parameters. We deeply believe that the drivers that we are presenting to you will satisfy your needs and are the fullange drivers that you were always looking for.

    So as you can see, we are obsessed with pushing boundaries and finding the frontier of what’s possible within the fullrange speaker concept. We are driven by our passion and we will never stop looking for the best sound possible. It is not an 8 hour job for us we do it, because we love it.  If you share our passion for full range speakers, look no further. You deserve them.

   All of our speakers, cones and voice coils are made and manually assembled in Poland. We take pride in our products and we always aim for highest quality. Each speaker is tested for 24 hours before shipment to ensure highest quality.

Další informace

Citlivost

Druh magnetu

,

Impedance

Průměr

QES

QMS

QTS

Rezonanční frekvence

Váha

Velikost